Observed principle 1
Smoke aerosols move with air currents and can deposit non-uniformly.
Smoke Authority · Guide 02
How Soot Particles Deposit on Surfaces
Why ceilings, corners, electronics and air pathways can show different residue patterns.
Primary sources first
What authoritative public sources establish
Observed principle 2
NIST research specifically studies soot deposition because surface loading varies with fire and airflow conditions.
Observed principle 3
Hidden and elevated surfaces can retain residue after broad visible cleaning.
Source boundary: This page summarizes public technical guidance. It does not reproduce proprietary restoration standards, insurer estimating systems, or licensed-professional conclusions.
SDM Intelligence interpretation
How this applies to soot deposition
For a soot deposition question, SDM Intelligence treats the incident as a set of observable conditions rather than assuming every room or material needs the same treatment. The practical objective is to identify the source, determine the pathways that spread the condition, separate cleanable material from physically damaged or inaccessible material, and document why each action is taken.
Field step 1
Map residue patterns before cleaning.
Field step 2
Inspect tops of doors, ledges, closets and mechanical pathways.
Field step 3
Use findings to define cleaning boundaries rather than assuming uniform impact.
Decision sequence
A practical order of operations
1. Safety and access. Confirm that the area can be entered and that utilities, structure, contamination and occupancy restrictions are understood.
2. Evidence before disturbance. Photograph the affected area, note pathways and limits of access, and collect measurements that are appropriate to the condition.
3. Source control. Remove or control the material or condition that is continuing to generate damage, particles, moisture or odor.
4. Cleaning / drying / removal. Choose the least destructive method that can reliably reach the affected material and produce a defensible outcome.
5. Verification. Reinspect the original source areas and hidden pathways before reconstruction or turnover.
Unknowns and professional boundaries
What still requires property-specific evidence
The sources above establish general principles, not the condition of a particular building. They do not tell us the temperature a specific assembly reached, the chemical composition of residue at your property, the structural capacity of a damaged member, or whether a specific material can be safely retained without inspection. Those conclusions require site evidence and, where appropriate, a licensed or qualified specialist.
Immediate life-safety, structural, electrical, medical, industrial-hygiene, code and other regulated questions should be directed to the appropriate authority or licensed professional.